Have you noticed grimy build-up in your washing machine? It is a sign it needs a thorough clean-up.
The dirt that disappears from your clothes has to go somewhere, right?
Washing machines aren’t designed with an outlet for this debris, and thus, the build-up. A dirty washing machine can’t clean your laundry efficiently.
For this reason, you need to clean it regularly.
Why You Need to Clean Your Washing Machine
Cleaning your washer helps to maintain it for longer use. It’s always easier to maintain something than fixing it.
When doing laundry, water doesn’t get to all parts of your washing machine. Therefore, a scummy substance builds up within your machine. Regular cleaning of the drum will eliminate this substance.
3 Steps of Cleaning Your Washing Machine
Here’s what you’ll need:
- White vinegar
- Baking soda
Step 1: Run Your Washer on Hot Water
You can start by mixing baking soda and water to act as your washing machine cleaner. Add the mixture to the detergent dispenser and pour about three cups of white vinegar into the washer’s drum.
White vinegar is recommended because it won’t damage or stain your clothes. Also, it removes and prevents bacterial growth and leaves your washer smelling fresh for longer.
Ensure you set your washer to run on hot water on a medium load setting. Allow the machine to run so that the baking soda and vinegar can mix. Then, let the water sit for about 30 minutes. The mixture naturally breaks up any mold and mineral deposits to leave a clean washing machine.
Step 2: Scrub the Washer
After the cycle is finished, use a toothbrush and sponge soaked in vinegar to scrub inside the washing machine.
Make sure you clean the soap dispenser and the inside of the door. For front-loading washers, you should also clean the rubber seal. If your machine has a removable detergent dispenser, soak it in the vinegar mixture, then scrub it.
Don’t forget to give the exteriors a thorough wipe-down. Use a toothbrush to get into the tub’s rim and other areas the sponge can’t reach. For a top loader, clean the agitator as well.
Step 3: Run Another Cycle
Run a second regular cycle with just hot water. You can choose to add a little vinegar to clear up any residue left from the washing process. After the cycle, leave your washer’s door open to allow the inside part to dry and to avoid mildew growth.
You should repeat this process every six months to prevent any mineral build-up and bacterial growth.
Do Your Laundry Better with a Clean Washing Machine
With the above steps, you can now clean your washing machine impeccably. Make sure you check your washing machines’ manual for instructions on how to clean it. Some manufacturers may discourage use of cleansers and de-scaling products in their machines. Using them may invalidate your warranty terms.
If you’re still having a hard time cleaning your washer, don’t hesitate to contact Hour Maid Cleaning Service for the top-notch residential house cleaning services.